Monotribe MIDI sync, Monotribe MIDI i/o and USB Monotribe power supply with just one cable. The USBtribe is a Monotribe MIDI modification which has been designed and built specifically to integrate with the Korg Monotribe Analog Ribbon Station. With a USBtribe MIDI interface installed in your synth you can exchange MIDI Note, Controller, Sync and Transport Messages between your synth and your computer directly, via a single USB cable. No 1980s DIN socket MIDI connectors or external computer interfaces required. The USBtribe MIDI interface will also allow you to power your Monotribe via that same USB cable, thus eliminating the need for batteries or an external PSU, although you can still use them if you want to. You get classic, Korg, analogue sounds with modern, USB standard convenience. Treat Monotribe to a USBtribe MIDI interface. It'll love you for it!
● Fully assembled: simply use the included cables to connect the USBtribe MIDI kit to your Monotribe
● Our Monotribe MIDI mod may be installed without modification to the Monotribe's case
● Plug and Play: the USBtribe appears as a midi port on the host computer
● MIDI Channel 1 (from synth sequencer) & Channel 10 (rhythm sequencer) send MIDI Note ON / OFF messages to external devices from the Monotribe sequencer
● Front panel knobs and switches variously send Continuous Controllers 1, 7, 11, 16, 17, 80, 81, 82 and 83 out on MIDI channel 1. Record knob tweaks and switch actions over MIDI
● Monotribe MIDI sync! Functions as a MIDI Clock/Sync Pulse converter using the Monotribe's Sync sockets
● Transport control over MIDI. Start, Stop, Continue external sequencer with front panel buttons
● Modify the synthesizer VCA and LFO modules with standard MIDI Continuous Controller messages 1, 7, 11, 16, 17, 80, 81, 82 and 83 on MIDI channel 1
● Play synthesizer with MIDI Note ON / OFF messages on channel 1
● Play drum sounds with MIDI Note ON / OFF messages on channel 10
● Transport control over MIDI. Start, Stop, Continue and Sync Monotribe from external sequencer
● Measures 35 mm × 46 mm (1.38" × 1.81")
● Monotribe power supply! The USBtribe is powered via the USB bus. The Monotribe may be powered via battery,DC supply or USB bus power
● Firmware is user-upgradable via USB
The DINtribe is a Monotribe MIDI modification which has been designed and built specifically to integrate with the Korg Monotribe Analog Ribbon Station. The DINtribe can be used to expand the capabilities of your Monotribe, to directly incorporate DIN socket MIDI devices, providing a low cost MIDI i/o solution.
● Fully assembled: simply use the included cables to connect the DINtribe MIDI kit to your Monotribe
● Our Monotribe MIDI mod may be installed without modification to the Monotribe's case
● MIDI Channel 1 (from synth sequencer) & Channel 10 (rhythm sequencer) send MIDI Note ON / OFF messages to external devices from the Monotribe sequencer
● Front panel knobs and switches variously send Continuous Controllers 1, 7, 11, 16, 17, 80, 81, 82 and 83 out on MIDI channel 1. Record knob tweaks and switch actions over MIDI
● Monotribe MIDI sync! Functions as a MIDI Clock/Sync Pulse converter using the Monotribe's Sync sockets
● Transport control over MIDI. Start, Stop, Continue external sequencer with front panel buttons
● Modify the synthesizer VCA and LFO modules with standard MIDI Continuous Controller messages 1, 7, 11, 16, 17, 80, 81, 82 and 83 on MIDI channel 1
● Play synthesizer with MIDI Note ON / OFF messages on channel 1
● Play drum sounds with MIDI Note ON / OFF messages on channel 10
● Transport control over MIDI. Start, Stop, Continue and Sync Monotribe from external sequencer
● Measures 35 mm × 30 mm (1.38" × 1.18")
By clicking the 'Buy Now' button you are agreeing to the terms and conditions.